This article may contain affiliate links. We may receive a commission for purchases made through these links.
When you purchase a new pair of wireless earbuds, the last thing you want is connectivity issues! However, don’t worry; we’re here to help.
If you're looking for more information on how to pair Skullcandy wireless earbuds, then there are a few steps you can take to resolve the issue.
First, check the instructions in the manual.
If this doesn’t help, you can try resetting your earbuds by simultaneously holding down both buttons for 10 seconds or pushing the buttons 6 to 8 times.
When pairing your earbuds, this is the general method to follow. Although, this can differ depending on what model earbuds you have.
With this in mind, we have outlined some of the best methods to help you pair your Skullcandy wireless earbuds.
The first step is to ensure your earbuds are fully charged. If not, place them on charge until they turn on.
On your device, switch on the Bluetooth connection.
Turn on pairing mode by holding down the power button until you notice a white flashing LED light.
On your device, locate the name of your earbuds. This is typically called ‘Skullcandy’ or a similar name.
Once your earbuds pop up, click the name, and you should be connected.
If you’re still having issues connecting your Skullcandy earbuds, below, we have outlined some helpful tips to help you resolve the problem.
Ensure your devices are near one another. This would be within five feet of your device and the earbuds.
Switch your device on and off. All that may be required is a soft reset to fix the problem. Turning on airplane mode is an easy way to achieve this.
Power down is a likely interference. If connected to a speaker, try turning it off and on. You may notice an improvement in the connection.
Try enabling pairing mode on your earbuds again, whether this is through the ‘forget this device’ on your smartphone or by unpairing the device and returning it to factory settings.
Following these steps should help you resolve any pairing issues and allow you to enjoy your earbuds once again.
You’ll know your earbuds are connected when a little symbol appears on the top corner of your smartphone. If you can’t see it, then go to settings and switch it on.
Below, you’ll find some helpful tips to help pair your Skullcandy wireless earbuds.
Switch your phone to discoverable mode. To do so, go to settings and turn on your Bluetooth discovery.
Your two devices need to talk to one another, therefore make sure they are close by.
Try switching your phone off and on, this usually clears up the problem. This can be easily achieved by switching on airplane mode.
Turn off any device that is already connected to your earbuds. If you’re having trouble connecting two devices, it could be because your earbuds are already paired with something else. If so, turn it off.
When pairing your two devices, ensure that they both have power. If the battery is too low, some devices have the tendency to switch the Bluetooth off. If this is the case, simply charge both devices and try connecting them again when you have enough power.
Remove the earbuds from your phone’s Bluetooth discovery and then re-discover it. If you can see the device on your phone but it isn’t connecting and receiving the data, you may want to start again.
iOS – you can remove a device from your iOS settings by clicking the device’s name and pressing ‘Forget This Device’.
Android – select the name of the device and then Unpair it. The device could be re-connected by repeating this process.
Remove it from the Wi-Fi router – interferences can usually be found within the same spectrum, including your Wi-Fi router which may be preventing the pairing. While your Wi-Fi is designed to connect devices, having them too close to the router isn’t a good idea.
From the Wi-Fi router vicinity, remove any USB 3.0 devices. This can sometimes be a concern due to USB 3.0 interference and backward compatibility.
If you’re trying to connect your device to your computer but are having trouble, try pairing it somewhere else. For instance, in a different port. On newer laptops, USB 3.0 ports are generally faster than USB 2.0 ports. Therefore, if the connection isn’t working, you may want to try different headphones.
When pairing devices, ensure that they are compatible with one another. Usually, your gadget will contain a profile detailing the devices it is compatible with, such as a headset or any other device. If unsure, consult your user guide.
One Side Of Skullcandy Earbuds Not Working: Solution
The main problem with Skullcandy, and any other wireless earbud device, is there can sometimes be connectivity issues. A frequent problem is one earbud working but not the other.
If one side of your earbuds isn’t working, follow these steps:
In your device, turn off the Bluetooth connection that is currently connected to your earbuds.
Put your earbuds back in the case, and close the lid.
Remove your earbuds from the case.
Locate the power button and press long and hard.
The earbuds should now be paired, and a beep will confirm this as successful.
Sometimes, all you need to do to fix your earbuds is to reset them back to factory settings.
How To Pair Skullcandy Wireless Earbuds - Final Thoughts
Over the years, earbuds have transformed. Where once you needed a wire to connect your earbuds to your music device, now, all you need is a Bluetooth connection.
However, when this isn’t working, that’s when problems can arise.
The easiest way to fix any connectivity problems is by resetting your earbuds back to factory settings and re-connecting them to your device again.
